Home :: Cellular / GSM Dialers :: GSM Professional-Monitoring

GSM Professional-Monitoring

Products

  •  per page
Uplink RJ45 Ethernet Jack to RJ11 Phone Jack w/ Power Leads (To connect Uplink 2550 to STS-410)
Item #: STS-RJWIRE
This wire is used to connect an Uplink 2550 to our STS-410 alarm system. The wire includes an Ethernet jack at one end and a regular phone jack at the other end. It also has two strands of wire to power the Uplink 2550 device directly from the STS-410 alarm system. (RJ45 Jack to RJ11 Jack.) It should be noted that this wire is handmade/constructed by Shield Tech Security.
Sign in to rate

Website Price: $5.95
Ebay/Amazon Price: $9.95 Save 40%
Quantity
Uplink 2530 and 2550 Power Adapter
Item #: STS-ULPWR12
This is a power adapter for the Uplink 2530 and Uplink 2550 Cellular Communicators
Sign in to rate

Website Price: $9.95
Ebay/Amazon Price: $12.95 Save 23%
Quantity
Uplink 2550 & 4550 Backup Battery
Item #: STS-UL2550BATT
This is the backup battery used in the Uplink 2550 and Uplink 4550 Cellular Communicator.
Sign in to rate

Website Price: $10.95
Ebay/Amazon Price: $17.95 Save 39%
Quantity
Uplink 2500 - GSM Alarm Communicator - CMS Primary or Backup Communicator
Item #: STS-UL2500
The Uplink 2500 is a cellular dialer that is used with our Professional Monitoring. This device uses the alarm's siren port to determine if a burglar or fire alarm has been activated. It then sends an alarm signal through the cellular network to the Central Monitoring Station. It is used as a general primary or secondary alarm communicator. It can not send zone information, troubles, or other detailed reporting.
Sign in to rate

Website Price: $39.99
Ebay/Amazon Price: $109.99 Save 64%
Quantity Out of stock
Uplink 2530 - GSM Alarm Communicator - CMS Primary Communication
Item #: STS-UL2530
The Uplink 2530 is a cellular dialer that is used with our Professional Monitoring. This device sends the alarm's Contact ID signals, through the cellular network, to the Central Monitoring Station. It is used as a full-event, primary communicator, and can send all zone information, troubles, and other detailed reporting.
Sign in to rate

Website Price: $49.99
Ebay/Amazon Price: $149.99 Save 67%
Quantity Out of stock
Uplink 2550 - GSM Alarm Communicator - CMS Primary or Secondary/Backup Communicator
Item #: STS-UL2550
The Uplink 2550 is a 2G Cellular Dialer that is used with our Professional Monitoring. This device sends the alarm's Contact ID signals, through the cellular network, to the Central Monitoring Station. It is used as a full-event, primary or secondary/backup communicator, and can send all zone information, troubles, and other detailed reporting.
Sign in to rate

Website Price: $59.99
Ebay/Amazon Price: $179.99 Save 67%
Quantity Out of stock
International 4G GSM Cellular Phone Dialer for Self Monitoring Alarm System LED Fixed Terminal 3G
Item #: STS-GSMC-4G-EU
Connect any of our security systems to this GSM Dialer. Simply purchase a GSM SIM card from an authorized cellular service provider, insert it into the bottom port, connect our included phone cable to your alarm, and your set!

This GSM Dialer is intended for SELF MONITORING, transmits voice calls, where the alarm will call you directly when an alarm occurs. However, it is also capable of transmitting Ademco Contact ID, data tones, for professional monitoring.
Sign in to rate

Website Price: $103.99
Ebay/Amazon Price: $119.99 Save 13%
Quantity Out of stock
4G GSM Cellular Phone Dialer for Self Monitoring Alarm System LCD Fixed Terminal 3G
Item #: STS-GSMD-4G
Connect any of our security systems to this GSM Dialer. Simply purchase a GSM SIM card from an authorized cellular service provider, insert it into the bottom port, connect our included phone cable to your alarm, and your set!

This GSM Dialer is intended for SELF MONITORING, transmits voice calls, where the alarm will call you directly when an alarm occurs. However, it is also capable of transmitting Ademco Contact ID, data tones, for professional monitoring.
Sign in to rate

Website Price: $126.99
Ebay/Amazon Price: $129.99 Save 2%
Quantity
Uplink 4550 - GSM Alarm Communicator - CMS Primary or Secondary/Backup Communicator
Item #: STS-UL4550
The Uplink 2550 is a 4G Cellular Dialer that is used with our Professional Monitoring. This device sends the alarm's Contact ID signals, through the cellular network, to the Central Monitoring Station. It is used as a full-event, primary or secondary/backup communicator, and can send all zone information, troubles, and other detailed reporting.

**OUT OF STOCK UNTIL FURTHER NOTICE**
Sign in to rate

Website Price: $189.99
Ebay/Amazon Price: $199.99 Save 5%
Quantity Out of stock
  •  per page