Cellular Dialer Overview
This is a 4G Cellular Dialer. This Cellular Dialer works on both 3G and 4G networks.
This Cellular Dialer is compatible with most security systems. Simply purchase a Cellular
SIM card from an authorized cellular service provider, insert it into the
dialer, and connect a standard phone line from your alarm system into the Cellular
This Cellular Dialer works just like a landline telephone, but it creates a standard
phone line using a cellular connection. This device is perfect for those who
don't have a telephone landline. This Cellular Dialer is also great for added
security since it makes it impossible for a burglar to cut the phone line
outside of your business or residence.
If your alarm system has the capability to call you directly over a standard
landline, then your alarm will work with this Cellular Dialer. Simply remove the
standard telephone line from your existing landline or VOIP phone port and plug
it into the phone port on the Cellular Dialer.
Your alarm system must have the capability of programming phone number(s) and
recording a message directly into it. You cannot program phone numbers or record
a message directly into the Cellular Dialer. The Cellular Dialer simply acts as a phone
line for the alarm to call out on.
This Cellular Dialer is intended for VOICE DIALING, but will also work with Ademco
Contact ID, data tones, that are compatible with professional monitoring.
Disclaimer: If used with Professional Monitoring Disclaimer: Just like all
digital VOIP phone lines, cellular service may also cause Contact ID (used with
professional monitoring) to fail, not reporting the alarm condition. Most alarms
are programmed to retry in the event of a failure. However, the re-attempt(s)
may also fail, causing no signals to be transmitted and no response to be taken
from the central monitoring station. By purchasing this unit, you agree and
understand the risks involved with using this cellular dialer with Contact ID,
or any form of professional monitoring.
The easy to read LCD Display shows the phone number that is being called when
the alarm system makes a phone call. It also displays the Caller ID of any
incoming phone call. The antenna strength is shown on the right hand side of the
display. Finally, the dialer will display any SIM Card or cellular tower problem
directly on it's screen.
Automatic Reset: New!
To help prevent interruption of service, this Cellular Dialer is equipped with an
automatic reset feature. This feature automatically resets the dialer if it
looses cellular service, can't find a signal, or fails.
How Does it Work?
1. Purchase a
regular SIM card from any provider (make sure the provider has a signal in your
2. Connect a
standard phone line to the telephone line port on the back of the Cellular Dialer.
3. Plug the antenna into the jack on the back of the Cellular
4. Insert a SIM card (sold separately) into the slot on the
back of the Cellular Dialer.
5. Plug in the power supply
6. Program your alarm (not this Cellular Dialer) to call the phone
numbers you would like it to call.
Great for protecting garages,
sheds, workshops and other places without a landline
All you need is a SIM card. No
need to sign your life away on a supplier contract
Convenient and simple to use
No tricky installation - just
plug it in!
Works with most burglar alarms
Compatible Networks: AT&T
Verizon, TracFone, and Sprint
Additional networks may be
compatible or non-compatible. We will update this section as we obtain more
An alarm system capable of
dialing a phone number. You must be able to program the phone number(s) in
your alarm system's programming.
You cannot program phone numbers
or record a message directly into the Cellular Dialer.
A Compatible SIM Card (Purchased
Separately) - We recommend AT&T or T-Mobile
Working Frequency: Cellular
850mhz/1900mhz (USA) /or 900mhz/1800mhz (International)
Voltage: 5v-12v Power (DC)
Battery: Lithium Backup Battery
This item comes with a limited 90-day warranty against manufacturer defects. If
the Cellular Dialer stops working within 90 days of purchase, please notify us. We
will provide an RMA to return the product to us. Once we confirm the device has
a manufacturer defect, we will replace the item for you. We ask that you cover
the return shipping to us (First Class Mail is about $3.50), but we will cover
the costs to have a new unit shipped to you.