Wired Outdoor Motion Detector

Detector Overview
This wired outdoor motion detector is used to detect unauthorized movement in a particular area outside of your home or office. Equipped with both Pet Immune and Smart Technology, this detector prevents false alarms by detecting both heat and movement while completely ignoring pets or small animals under 38lbs.

The motion detector lens produces a 3-dimensional thermal image of the protected area that it is protecting. Combined with the four-element microwave scanning, this allows for high sensitivity and reduces the chance of false alarms.

Coverage
Detects movement within 20-25 ft of the detector in a 90 degree angle.
 
Pet Friendly
Your pets under 38 lbs will not trigger the alarm. The detector is programmed to know the difference between pets and humans based on body heat and movement.
 
Wired Connections
This wired smoke detector uses 4 wires in total. 
Two wires are for power (+) and (-). 
Two wires are used for the Normally Closed (NC) circuit.

Installation
It is screwed into the wall with the included hardware.
 
Home/Away Arming Modes
In your alarm system's "away" mode setting, the detector will be triggered by movement in the rooms that you want covered. In the "home/stay" mode, it will pick up movement but will not signal the alarm system allowing you to roam the residence freely.
 
-- Detector Specifications --
Voltage:  12v DC (12 Volts)
Frequency: 433mhz
Encryption: 36 Data-Digit
Current: 2-5mA (Standby); 20mA (Alarming)
Detecting Distance: 20 - 25 ft/90°
Best Working Temperature: 14°F – 122°F