Location & Currency
Compatibility: STS-4xx Series (Full List in Description)
This wired motion detector is used to detect unauthorized movement in a
particular area of your home or office. Equipped with both Pet Immune and Smart
Technology, this detector prevents false alarms by detecting both heat and
movement while completely ignoring pets under 38lbs. Includes mounting bracket.
Detects movement within 20-25 ft of the detector in a 90 degree angle.
Your pets under 38 lbs will not trigger the alarm. The detector is programmed to
know the difference between pets and humans based on body heat and movement.
This wired smoke detector uses 4 wires in total.
Two wires are for power (+) and (-).
Two wires are used for the Normally Closed (NC) circuit.
A mounting bracket with a ball joint slides into the back of the detector. This
allows you to angle the detector in pretty much any direction you want. It is
screwed into the wall with the included hardware.
Home/Away Arming Modes
In your alarm system's "away" mode setting, the detector will be triggered by
movement in the rooms that you want covered. In the "home/stay" mode, it will
pick up movement but will not signal the alarm system allowing you to roam the
-- Detector Specifications --
Voltage: 12v DC
Current: 2-5mA (Standby); 20mA (Alarming)
Detecting Distance: 20 - 25 ft/90°
Best Working Temperature: -10°C - 40°C (14°F – 122°F)
© 1999 - 2020 Shield Tech Security. All rights reserved.