Location & Currency
Compatibility: STS-4xx Series (Full List in Description)
Placed in the middle of the wall or above a window, the detector will pick up
any movement that breaks the beam. Nothing above or below the narrow beam will
set it off.
Motion detectors are used to detect un-authorized motion in a particular area of
your home. This vertical angle motion detector can be placed four feet off the
floor in a horizontal position to ignore any movement under it's beam. This will
allow for larger pets to walk under the beam.
Detector shoots a narrow beam extending outward 30 ft and extending 10 feet left
and right. The beam fans out in a 90 degree angle.
This detector is not pet immune. It is recommended that you mount it at a height
you are sure your pet is not going to get to. Mount the detector on the wall and
turn it horizontally so that it shoots a horizontal beam instead of a vertical
Home/Away Arming Modes
In your alarm system's "away" mode setting, the detector will be triggered by
movement in the rooms that you want covered. In the "home/stay" mode, it will
pick up movement but will not signal the alarm system allowing you to roam the
A mounting bracket with a ball joint slides into the back of the detector. This
allows you to angle the detector in pretty much any direction you want. It is
screwed into the wall with the included hardware.
-- Detector Specifications --
Battery: 2x AA
Battery Life: 1 Year
Antenna Range: 250 ft. – 450 ft.
Encryption: 36 Data-Digit
Best Working Temperature: 14°F – 122°F
-- Detector Dimensions --
Sensor: 3.54 x 1.97 x 1.57 inches (8.99 x 5.00 x 3.99 cm)
-- Compatibility --
STS-407, STS-408, STS-410, STS-411, STS-412, STS-415, STS-420, STS-421, STS-450, STS-451, STS-455
© 1999 - 2020 Shield Tech Security. All rights reserved.